• Easy spring loaded height adjustment.
  
  
• Four point H-base with two locking dual wheel nylon casters.
  
  
• Height: 28" - 43".
  
  
• Dimensions: Base: 15½" x 26½"; Top: 15" x 30" x ¾" thick.
  
  
• Weight: 27 lbs.; Weight capacity: 50 lbs.
  
  
• Some assembly is required.  Quick Ship!
  
  
• #11600 includes Gray laminate top, vinyl trim, gray epoxy finish on base.
  
• #11610 includes Walnut grain laminate top, vinyl trim and chrome plated base.
  
• #11640 low height overbed table with Walnut laminate top, vinyl trim and chrome plated base. Height range of 19" - 27". List: $146. Cost: $97.

• Easy spring loaded height adjustment.
  
  
• Four point U-base with two locking dual wheel nylon casters. U-base easily fits into restricted space.
  
  
• Height: 28" - 43".
  
  
• Dimensions: Base: 15½" x 26½"; Top: 15" x 30" x ¾" thick.
  
  
• Weight: 27 lbs.; Weight capacity: 50 lbs.
  
  
• Some assembly required.  Quick Ship!
  
  
• #11620 includes Walnut laminate top, vinyl trim, chrome finish on base.
  
  
• #11630 includes Gray laminate top, vinyl trim and gray epoxy finish on base.

All prices quoted are FOB Factory.  Freight is pre-paid and added to invoice. Prices are subject to change without notice.

Free freight within the contiguous 48 when you purchase 6 or more. No residential deliveries.

• Easy spring loaded height adjustment.
  
• Walnut laminated top.
  
  
• Chrome-plated base and single hand-spring loaded lever height adjustment.
  
• Dual wheel nylon casters.
  
• Height range: 28" - 43".
  
  
• Dimensions: Base: 16" x 26½"; Top: 15½" x 31½".
  
• Shipped knocked down.
  
• Weight capacity: 50 lbs.

• Easy spring loaded height adjustment.
  
• Walnut laminated top.
  
  
• Chrome-plated base and single hand-spring loaded lever height adjustment.
  
• Dual wheel nylon casters.
  
• Height range: 28" - 43".
  
  
• Dimensions: Base: 16" x 26½"; Top: 15½" x 31½".
  
• Shipped knocked down.
  
• Weight capacity: 50 lbs.

• This is a unique product with lots of features including:
  
• Smooth, easy Hi-Low operation. Height adjustment range between 30½" - 45½" with a strong positive lock in 1" increments.
  
• Five times more weight capacity than the leading overbed table. In a locked position, column provides a static load of up to 500 lbs. evenly distributed over the top surface.
  
• Oversized 18" x 40" high pressure laminate top surface that reaches beyond the middle of wide bariatric beds.
• Laminate top is designed to resist damage from spills of alcohol, boiling water, food acids or inks.
  
• Structurally reinforced H based design with tubular steel and welded frame extending almost the entire length of the table.
  
  
• Inside base dimension of 35" that allows for use with most bariatric chairs.  2" twin wheel casters provide smooth maneuvering.
  
• Flush mounted T-mold is standard.  An opal powder coated column and base is also standard.  Alternate base finish options are available.  Other options include: Vanity with dual hinged mirrors and a variety of laminate colors.  See below choices.
  
• Shipping weight: 75 lbs.  Warranty: 1 year.  See details below.

Acute Care Pediatric Split Top Pneumatic Overbed Table

• Add decor to your pediatric rooms with colorful overbed tables.
  
• Guaranteed to make children smile!
  
  
• Laminate design theme choices include colorful hearts, sport photos, monster trucks & gumballs.
  
• See actual laminate choices below.
  
  
• Tops and bases are also available in primary colors to match your colors and decor.
  
• Dual tops provide maximum space for food trays and personal items.
  
  
• Lower table top is hidden until easily activated with a single touch of a lever.

• Dual vanity with non-breakable acrylic mirror is included.
• Also available with just a single top and without the dual vanity.
  

• Newly designed cup holder inserts fit into urethane section of the table top and accommodate most commonly used beverage containers.
• Flexible tabs within the cup holders grip the cup, preventing spills.  Tab inserts are easily removed for cleaning.
  

• Functional design features include dual molded ergonomic handles with steel reinforcement and a comfortable grip to enhance easy mobility.
  
• Base Design and Function:
  
• Pneumatic lift mechanism provides infinite height adjustment between 29½" - 44½".
  
• Internal bushings for smooth height adjustment.
  
• Column can be easily changed to mount on the right or left side.
  
• Low height provides comfortable use from most patient room seating.
  
• Wide 28" opening allows easy access for most wheelchairs.
  
• Available in U and H stye base design.
  
• Opal powder coated base and column.
  
  Additional Specifications:
  
• Top Surface:  Upper top: 18" x 32"; Lower top: 17½" x 26½"; Weight: 69 lbs.; shipping weight: 75 lbs.; Weight capacity: 100 lbs. evenly distributed.  Warranty: 1 year.
  
  Options and Upgrades:
  
• Add $35 for 1¼" low profile casters with a 2¼" clearance.
  
• Note: 2" casters with a 4" clearance is standard.
• These #4950 series acute care overbed tables always ship fully assembled.
  
• Single top table or table without double vanity.
• Alternate high pressure laminate colors, urethane edge colors and base finish options.  See below choices.

           Top of the Line Overbed Table
Acute Care Executive II Split Top Pneumatic Overbed Table

• This is the same basic table as the Pediatric Table shown above.
  
  
• It's available with 10 different standard laminate colors and 5 urethane edge colors.  See below choices.
  
  
• It is similar to Hill-Rom's model # OBT-230 except with added features.
  
  
• Dual tops provide maximum space for food trays and personal items.
  
  

Lower table top is hidden until easily activated with a single touch of a lever.

• Pneumatic lift mechanism provides infinite height adjustment between 29½" - 44½". Internal bushings for smooth height adjustment.
  
  
• Newly designed cup holder inserts fit into urethane section of the table top and accommodate most commonly used beverage containers.
  

• Flexible tabs within the cup holders grip the cup, preventing spills.  Tab inserts are easily removed for cleaning.
  
  
• Functional design features include dual molded ergonomic handles with steel reinforcement and a comfortable grip to enhance easy mobility.
  
• Low height provides comfortable use from most patient room seating.
• Wide 28" opening allows easy access for most wheelchairs.
  
  Specifications:
  
• An optional vanity with dual hinged mirrors is included.
• Top Surface:  Upper top: 18" x 32"; Lower top: 17½" x 26½"; Weight: 69 lbs.; Shipping weight: 75 lbs.;
• Weight capacity: 100 lbs. evenly distributed.
  
•  Available in U and H stye base design.
  
• Column can be easily changed to mount on the right or left side.
  
• Opal powder coated base and column.  Warranty: 1 year.
  
  Options and Upgrades:
  
• Add $35 for 1¼" low profile casters with a 2¼" clearance.
  
• Note: 2" casters with a 4" clearance is standard.
• These #4950 series acute care overbed tables always ship fully assembled.
  
• Alternate high pressure laminate, urethane edge and base color options.  See below choices.

Dual Column Table with Spring Loaded Height Adjustment:

• This Heavy-Duty Multi-Purpose table model is ideal for hand therapy, computer use and recreation.
  
  
• Rehab Center or Specialty Clinic Care providers can treat or evaluate patients at a number of comfortable positions from sitting to standing.
  
  
• Table includes a high pressure Fashion Grey top, Black T-mold edging and a Black epoxy powder coated H style welded base and columns.
  
  
• Includes 1½" dual wheel locking casters mounted at the extreme points on the legs for maximum stability.
  
• Patented dual column automatic spring-assisted lift mechanism with dual hand release controls allow for infinite height adjustment between 28" and 45".
  
• Table top dimensions:  18"w x 32"l.  Weight capacity: 100 lbs. evenly distributed.
  
• Ships fully assembled.  Weight: 39 lbs.  Warranty: 1 year.  See details below.

Acute Care Single Top - Spring Assisted Overbed Table:

• Easy spring loaded height adjustment locks into place in 1" increments between the 30" and 45" range.
  
  
• Raises with the slightest upward pressure applied to any point under the top.
  
  
• Automated lift safety feature helps to prevent accidental tipping of the table if the bed rises while the table is over it.
  
  
• Also available with an optional vanity.
  
  
• Chrome-plated 11 and 12 gauge welded tubular steel column and base with Black twin casters.
  
  Additional Specifications:
  
• Top Surface: 18"w x 32"d with Walnut wood grain high pressure laminate on ¾" particle board core.  Flush mounted vinyl T-mold is included.
  
• Weight capacity: 100 lbs. evenly distributed; Weight: 59 lbs.
  
• Warranty: 1 year.  See details below.
  
  Options and Upgrades:
  
• Vanity with dual hinged mirrors.  Add $83.  See below for additional details.
  
• Add $35 for 1¼" low profile casters with a 2¼" clearance.
  
• Note: 2" casters with a 4" clearance is standard.
  
• Tables are shipped knocked down via UPS.  Table is easily assembled with 4 bolts.
  
• Add $25 per table for assembly at factory.
  
• Alternate high pressure laminate base finish color options.  See below choices.

Acute Care Single Top - Pneumatic Overbed Table:

• Similar to Hill-Rom's #210 and Stryker's Tru Fit except with added features and a probable price savings for you!
  
• Pneumatic lift mechanism adjusts height between 30" - 45" smoothly and quietly.
  
  
• The top automatically raises with the slightest upward pressure on any point under the table and lowers with a simple touch of the trip handle.
  
  
• Also available with an optional vanity. Includes two compartments with hinged acrylic mirrors.
  
  
• Opal powder coated 11 and 12 gauge welded tubular steel column and base with Black twin casters is standard.
  
  
• The extra heavy-duty U base has 29" of inside clearance to accommodate most wheelchairs, geri chairs and patient room seating.  Column can be mounted on right or left side.
  
  Additional Specifications:
  
• Top Surface: 18"w x 32"d with Walnut wood grain high pressure laminate on ¾" particle board core.  Flush mounted vinyl T-mold is included.
  
• Weight capacity: 100 lbs. evenly distributed; Weight: 59 lbs.
  
• Warranty: 1 year.  See details below.
  
  Options and Upgrades:
  
• Vanity with dual hinged mirrors.  Add $50.  See below for additional details.
  
• Add $35 for 1¼" low profile casters with a 2¼" clearance.
  
• Note: 2" casters with a 4" clearance is standard.
  
• Tables are shipped knocked down via UPS.  Table is easily assembled with 4 bolts.
  
• Add $25 per table for assembly at factory.
  
• Alternate high pressure laminate colors.  See below choices.
  
• Alternate base finish options.  See below choices.

                                    NEW!
Acute Care Executive Single Top - Pneumatic Table:

• Pneumatic height adjustment and 18" wide x 32" long top.  
  
• Similar to Hill-Rom's #210 and Stryker's Tru Fit.
  
• However this acute care overbed table is unique because it includes the following:
  
  
• Heavy duty dual urethane handles for easy maneuverability, positioning and transporting.
  
  
• It includes cup holders that accommodate most beverage containers with flexible tabs to grip the cup, thus preventing spills.
  
  
• Raised urethane edge is standard, providing up to a half gallon spill containment.
  
  
• Edge also keeps items from rolling off.  Storage area between cups holders is perfect for pens, pencils and other small objects.
  
  
• One handed pneumatic Hi-Low operation provides infinite height adjustment between 27" and 42".  This height range provides comfortable use from most patient room seating in the lowest position.  Includes internal bushings for smooth height adjustment.
  
  Additional Specifications:
  
• Top Surface: 18" x 32"; Weight: 55 lbs.; Weight capacity: 100 lbs. evenly distributed.
  
• An optional vanity with dual hinged mirrors is included.  An opal powder coated column and base is standard.
•  Alternate base finish options are available.  
  
• U or H base design is also available.  28" inside base dimension gives you the ability to go around chairs and wheelchairs.
  
• Right or left column mounting flexibility and a variety of laminate and urethane edge colors.  See below choices.
•  Warranty: 1 year.  See details below.
  
  Options and Upgrades:
  
• Add $35 for 1¼" low profile casters with a 2¼" clearance.
  
• Note: 2" casters with a 4" clearance is standard.
  
• Tables are shipped knocked down via UPS.  
  
• Table is easily assembled with 4 bolts.
  
• Add $25 per table for assembly at factory.
  
• Alternate high pressure laminate colors.  See below choices.
  
• Alternate base finish options.  See below choices.

Acute Care Split Top - Pneumatic Overbed Table

• This acute care overbed table is similar to Hill-Rom's model #OBT-220 and Stryker #3150-000-003.
  
• However this table is unique because it includes the following:
  
• Pneumatic lift mechanism adjusts height between 30" - 45" smoothly and quietly.
  
• The top automatically raises with the slightest upward pressure on any point under the table and lowers with a simple touch of the trip handle.
  
• Optional vanity is included. Vanity includes two compartments with hinged acrylic mirrors.
  
• Opal powder coated 11 and 12 gauge welded tubular steel column and base with Black twin casters is standard.
  
• The extra heavy-duty U base has 28" of inside clearance to accommodate most wheelchairs, geri chairs and patient room seating.  Right or left column mounting flexibility.
  
  Additional Specifications:
  
  
• Top Surface: 18"w x 32"d with Walnut wood grain high pressure laminate on ¾" particle board core; Lower top: 17" x 26"; Weight: 75 lbs.; Weight capacity: 100 lbs.
  
• Flush mounted vinyl T-mold is included.
  
•  Available in U and H stye base design. Warranty: 1 year.  See details below.
  
  Options and Upgrades:
  
  
• Add $35 for 1¼" low profile casters with a 2¼" clearance.
  
• Note: 2" casters with a 4" clearance is standard.
  
• These #4850 series acute care overbed tables always ship fully assembled.
  
• Alternate high pressure laminate and base finish color options.  See below choices.
  

Optional Vanity

• Vanity locks in place in the closed and open positions.  Can be accessed from both sides.
  
• Double vanity mirror features a two way design that opens from both sides of overbed table top.
  
• Dual compartments measure 7" x 13¼"l x 1¾"d.
  
• Non-breakable hinged acrylic mirror mounts measures 7 7/16"w x 13 7/8"l. Overall size: 15¼"w x 17½"l x 2 3/8"d.
  
  
• Note:  When split top table is activated, the upper table slides either forward or back, allowing the lower table to move into the opposite direction.

Copyright 2005 - 2010, SW Med-Source Inc., All Rights Reserved.