click to enlarge
These single and double mesh finger traps
are used during extremity traction, wrist arthroscopies and casting procedures.
Optional non-sterile 2' Nylon Cord w/ 2 metal clips. Note: Sterile cord is not available.
Sterilization Instructions
|
Non-Sterile Finger Traps
- These latex-free mesh finger traps firmly grip fingers and hands to provide a comfortable, custom fit for each traction procedure.
- Our color coded surgical traction finger traps are made with a double-sleeved, soft mesh material. A 2" loop of strong nylon braid cord attaches finger trap to traction device.
- Designed for single disposable use. Although some facilities will clean, sterilize and reuse them several times until the mesh fabric begins to break down. They are then discarded.
- Sterilization Instruction link is shown under photo to the left.
- Available in non-sterile, single or double (as shown in photo) with 5 color coded sizes that are also identified with their specific size.
- Sizing: Extra Small fits infants and samll children; Small fits children 2 and over and small adult fingers; Medium fits most adult fingers and toes; Large fits men's fingers, large toes and women's thumbs; Extra large fits extra large fingers and toes.
- An optional non-sterile 2' spare cord with two clips is available to attach finger traps onto a traction bow or sand bag weight.
- Optional 2' Nylon Cord, Non-Sterile with metal clips is available to string finger traps onto traction bow. #NC-100PL $4 each.
- Sold only to hospitals and physician offices.
|
Updated 3/12
Save 13% compared to
our biggest competitor.
Non-Sterile
Single Finger Trap
#K-100-XS-PL
Extra Small: $15 ea.
#K-200-S-PL
Small: $15 ea.
#K-300-M-PL
Medium: $15 ea.
#K-400-L-PL
Large: $15 ea.
#K-500-XL-PL
Extra Large: $15 ea.
Non-Sterile
Double Finger Trap
#K-D100-XS-PL
Extra Small: $25 ea.
#K-D200-S-PL
Small: $25 ea.
#K-D300-M-PL
Medium: $25 ea.
#K-D400-L-PL
Large: $25 ea.
#K-D500-XL-PL
Extra Large: $25 ea.
(Minimum order: $75) |
click to enlarge
Order them individually. (Minimum
order is
4 ea. assorted size sterile finger traps)
Or order eight sterile finger traps
in a convenient storage/ dispenser
box. Each box contains 8 ea. sterile
finger traps of the same size. |
Sterile Single Finger Traps
- These latex-free mesh finger traps firmly grip fingers and hands to provide a comfortable, custom fit for each traction procedure.
- Our color coded surgical traction finger traps are made with a double sleeved, soft mesh material. A 2" loop of strong nylon braid cord attaches finger trap to traction device.
- Sizing: Extra Small fits infants and small children; Small fits children 2 and over and small adult fingers; Medium fits most adult fingers and toes; Large fits men's fingers, large toes and women's thumbs; Extra large fits extra large fingers and toes.
- Manufacturing and sterilization protocol meets ISO13485 guidelines and procedures. A Certificate of Compliance is available upon request.
- Order them individually. (Minimum order is 4 assorted sterile finger traps)
- Or order eight sterile finger traps in a convenient storage/ dispenser box. Each box includes 8 finger traps of the same size.
- Optional 2' Nylon Cord, Non-Sterile with metal clips is available to string finger traps onto traction bow. #NC-100PL $4 each. See above photo.
- Save between 11% to 38% over our two biggest competitors.
- Sold only to hospitals and physician offices.
|
Sterile Single Finger Traps - (Individual)
#SK-100-XS
Extra Small: $23 each
#SK-200-S
Small: $23 each
#SK-300-M
Medium: $23 each
#SK-400-L
Large: $23 each
#SK-500-XL
Extra Large, $23 each
(Minimum order: 4 ea. assorted size finger traps)
_______________
Sterile Single Finger Traps (Eight finger
traps, same size, in
a dispenser box)
#SK-150-XS Extra Small, $159/ box of 8 ea.
#SK-250-S Small,
$159/ box of 8 ea.
#SK-350-M Medium,
$159/ box of 8 ea.
#SK-450-L Large,
$159/ box of 8 ea.
#SK-550-XL Extra Large, $159/ box of 8 ea.
(Minimum order: 1 box)
|
Size patient fingers
before opening packages.
|
Finger Trap Sizer Kit
- Used for sizing fingers prior to opening finger trap packages.
- Finger traps are color coded with the same colors as above mesh finger traps and are labeled appropriately as Pediatric, Small, Medium, Large and Extra Large.
- Latex-free, non-sterile. Sold only to hospitals and physicians.
|
Finger Trap Sizer Kit
#K-950-PL
Ring includes one
pediatric, small,
medium, large and
extra large finger trap:
Your cost: $68 each
|
click to enlarge
Sterilization Instructions
|
Stainless Steel Finger Traps
- These surgical traction finger traps are constructed with stainless steel wire mesh.
- Reusable, autoclavable single wire traps are available in four different sizes. They also can be purchased in a set. You would then receive one of each size
- Patient's fingers can be wrapped with sterile tape before use. This may reduce the risk of nerve damage when using stainless steel finger traps.
- These finger traps are not available in extra large.
|
Stainless Steel
Single Finger Trap
#K-3278
Pediatric: $38
#K-3280
Small: $38
#K-3285
Medium: $38
#K-3290
Large: $38
#K-3300
Set of four, one
of each size: $145
(Note: Minimum
order is $70) |
 
click to enlarge
Equalizing Device and Accessories
Sterilization Instructions
|
Digi-Grip Equalizing Device and Accessories
- This autoclavable vertical Digi-Grip Equalizing Surgical Traction Device is for use with surgical mesh or stainless steel finger traps.
- It provides the same amount of traction to all five digits. Maximum weight capacity for this device is 25 lbs.
- Use either an I.V. pole or traction tower for traction while traction strap and weight (as shown) provide the needed counter-traction on the patient's humerus.
- Finger Traps, traction strap, S-hook and weights are sold separately. Weights are shown below. IV pole and traction tower sold separately. See link to right. Traction towers shown below.
- This set-up provides a cost-effective uppper extremity apparatus for setting fractures, casting and wrist arthroscopies.
- Photo shows S-hook attaching equalizing device to an IV pole and an S-hook attaching the traction strap to the weight.
- Digi-Grip Package includes 1 Equalizing Device, 1 ea. Traction Strap and 2 ea. Stainless Steel S-Hooks - as shown in photo.
|
Digi-Grip
Equalizing Device
#DG-3000-PL
Your cost: $229
Traction Strap
#WS-1820-PL
Your cost: $35
S-hook,
pack of 2 ea.
#K-3270-PL
Your cost: $30
Digi-Grip Package:
1 Equalizing Device,
1 Traction Strap
and 2 S-Hooks:
#DG-7550-PL
Your cost: $285
To see lots of
IV Pole Choices:
Click here
(Note: Minimum
order is $70)
|
click to enlarge
|
Allen® Schlein Hand Positioner
- This autoclavable horizontal surgical traction device is used together finger traps that are attached to nylon cords with clips.
- Innovative cleat system can be used together with or without weights.
- Supports multiple hand positions.
- Fits Allen Arm & Hand Tables, stock# A-30410-C, A-30650-C
and certain other 15"+ wide hand tables. Contact us for details.
- Rail attachment is included. Device is CE marked.
|
Allen® Schlein
Hand Positioner
#A-20750
Your cost: $999
Note: Finger traps
and cord with clips
are sold separately.
|
Twelve weight choices are available.
These weights are color coded
and labeled with their specific
weight - for easy identification. |
Cando® Softgrip™ Weights
- These weights are soft, vinyl covered, easily cleaned, color coded to indicate weight. And they're inexpensive!
- Metal grommets allow them to be hung safely.
- SW-10-0350 Softgrip Weight, Tan, ½ lb. Cost: $6
- SW-10-0351 Softgrip Weight, Yellow, 1 lb. Cost: $7
- SW-10-0352 Softgrip Weight, Red, 1½ lbs. Cost: $8
- SW-10-0353 Softgrip Weight, Green, 2 lbs. Cost: $9
- SW-10-0354 Softgrip Weight, Blue, 2½ lbs. Cost: $10
- SW-10-0355 Softgrip Weight, Black, 3 lbs. Cost: $11
- SW-10-0356 Softgrip Weight, Silver, 4 lbs. Cost: $13
- SW-10-0357 Softgrip Weight, Gold, 5 lbs. Cost: $15
- SW-10-0358 Softgrip Weight, Tan, 6 lbs. Cost: $17
- SW-10-0359 Softgrip Weight, Yellow, 7 lbs. Cost: $19
- SW-10-0360 Softgrip Weight, Red, 7½ lbs. Cost: $20
- SW-10-0361 Softgrip Weight, Green, 8 lbs., Cost: $21
- SW-10-0383 Softgrip Weights, 10 pc. set. Cost: $98
(Set includes 2 of each Softgrip weights, 1, 2, 3, 4 & 5 lb.)
- SW-10-0384 Softgrip Weights, 16 pc. set. Cost: $140
(Set includes 2 of each Softgrip weights, ½, 1, 1½, 2, 2½, 3, 4 & 5 lb.)
|
Minimum order is 6 individual assorted,
1 ten piece set
or 1 twelve
piece set.
These weights are
soft yet durable.
(Note: Minimum
order is $70)
|
|
|
| 3 lb. weight with grommet, 7" x 7" |
7 lb. weight with grommet, 6" x 17" |
 |
| 12 lb. weight with grommet, 7" x 24" |
|
Vinyl Silica Sand Bag Weights
- These heavy-duty sand bag weights are ideal for use with above traction tower, finger traps and other traction devlces.
- They are vinyl covered/ easily cleaned.
- Silica filled sand bags shown are heat-sealed to prevent leakage.
- Available in 3 lb., 7 lb. and 12 lb. versions.
- All three sizes include reinforced grommets.
|
Silica Sand Bag
#SW-50-556
Weight, 3 lbs.:
Your cost: $18
_____________
Silica Sand Bag
#SW-50-557
Weight, 7 lbs.:
Your cost: $21
____________
Silica Sand Bag
#SW-50-25067
Weight, 12 lbs.:
Your cost: $25
(Minimum order: 3
assorted sand bags) |
 |
Arm & Hand Table Accessory Rail
- This hand table accessory rail mounts to blocks underneath arm and hand table with two screws that are countersunk.
- Features solid stainless steel construction.
- Attaches to most SW-40 Arm & Hand Tables - also shown on this website. Click here
- Allows for you to attach clamps and traction accessories.
|
Add-A-Rail,
18" long:
#SW-40-324
Your cost: $321
|
click to enlarge
This Traction Tower is compatible with all
of our SW-40 Arm/ Hand Surgery Tables
with the Blue mounting blocks. Some of
these tables are rectangular. Others
have an hourglass shape.
Visit our Hand Surgery Table
page to see these tables.
Click here |
Equalizing Device & Horizontal Traction Tower
- This Equalizing Device can be used when three or more digits are placed into traction.
- It can be used with this Traction Tower and accessory rail set-up as shown in photo or other extremity systems.
- Stainless Steel hooks and chain are included to secure finger traps. You can "click to enlarge" photo for an enhanced view of this product. Note Finger traps are sold separately.
- This surgical traction accessory is fully autoclavable.
- This Horizontal Traction Tower attaches easily to all of our
SW-40 model Arm/ Hand Tables with the Blue mounting blocks - shown on this website. Click here
- It includes an adjustable 3/4" outside diameter square tube with a 1/2" telescoping tube. This tube is welded to a horizontal rail that bolts into aluminum blocks on the underside of the hand tables mentioned above.
- This tower device is constructed with strong, solid and dependable stainless steel. Ships complete with all necessary hardware.
|
Equalizing Device
#SW-40-350
Your cost: $256
Note: Choose your
finger traps and
weights from
above selection.
____________
Traction Tower
18" long, for
rectangular
shaped table:
#SW-40-344
Your cost: $193
__________
Traction Tower
24" long, for
hourglass
shaped table:
#SW-40-345
Your cost: $207 |
|
Alumi-Hand Surgical Hand Immobilizer
Disposable, Single-Use
- Sterile and ready to use, this single-use, disposable, X-ray compatible hand immobilizer allows for easy hand positioning.
- A comfortable foam exterior is on both sides of the pliable coated aluminum hand immobilizer.
- Ideal for reconstructive hand surgery, this orthopedic hand positioner provides a safe alternative to traditional lead hands and splints.
- Also includes a unique anti-tilt tab designed to prevent arm and hand rotation during surgery.
- This aluminum hand fixation device is lead-free and latex free. Available in pediatric/ small, large and extra large sizes.
- Pediatric/ small size measures 7" from bottom of device to the longest finger tip. The width of this immobilizer is 6¼".
- Large size measures 9½" from bottom of device to the longest finger tip.
- Extra large size is 13" from bottom of device to the longest finger tip.
|
Pediatric/ Small Alumi
Hand Immobilizer:
#SW-35-759
Your cost: $89
per box of 4 each
Large Alumi
Hand Immobilizer:
#SW-35-760
Your cost: $89
per box of 4 each
Extra Large Alumi
Hand Immobilizer:
#SW-35-761
Your cost: $78
per box of 3 each
|
Sterilization Instructions
|
Dura-Hand Surgical Hand Immobilizer
Autoclavable and reusable
- Sterile and ready to use, this autoclavable, reusable, X-ray compatible hand immobilizer allows for easy hand positioning.
- Features a thicker medical grade, pliable polypropylene coated aluminum. The result is you get more uses with our hand immobilzer positioning device.
- Withstands 50 to 100 articulations verses our competitor's 20 articulations. Sterilization instructions must be followed.
- Ideal for reconstructive hand surgery, this orthopedic hand positioner provides a safe alternative to traditional lead hands and splints.
- Also includes a unique anti-tilt tab designed to prevent arm and hand rotation during surgery.
- This aluminum hand fixation device is lead-free and latex free.
- Available in large and extra large sizes. Large size measures 9½" from bottom of device to the longest finger tip. Extra large size is 13" from bottom of device to the longest finger tip.
|
Large Dura
Hand Immobilizer:
#SW-35-DH-225
Your cost: $89 each
_____________
Extra Large Dura
Hand Immobilizer:
#SW-35-DH350
Your cost: $99 each
|
|
click to enlarge
The durable honeycomb designed
aluminum platform attaches to a
stainless steel base. The ball joint
construction permits tilting of the
hand to accommodate the
surgeon's point of view.
User Instructions |
Surgical Hand Holding Table
Autoclavable and reusable
- This Surgical Hand Holding Table is an alternative to the hand immobilizer or lead hand.
- It is designed to allow the surgeon - without the help of the scrub nurse - to tether the hand and fingers to a stable, adjustable platform during all types of hand and wrist surgeries/ procedures.
- The platform then provides tie points to apply hook retractors from almost any direction.
- The weight and stability of the Surgical Hand Holding Table keeps the hand where the light is focused.
- It also allows for tilting of the hand to accommodate the surgeon’s point of view.
- This device works well for all hand procedures including Carpal Tunnel, Metacarpal Fracture, Mucous Cyst, LRTI, De Quervian's release and Ulnar Shortening.
- A simple example of the utility of the Surgical Hand Holding Device can be demonstrated with a carpal tunnel release. The hand is stabilized to the adjustable platform using inexpensive silicone tubing.
- The fingers and thumb are held down securely without the need for an assistant. Four hook retractors maintain the skin edge, separated to allow access to the depths of the wound.
- The dorsal approach to a fractured metacarpal is convenient
and simple, but the skin edges and extensor tendons need to
be retracted.
- How much trouble is it for a nurse to retract the tissues both toward and away from themselves? With both hands occupied, how can he/ she pass instruments or select screws for fixation? This device eliminates the scrub nurse's roll in this process.
- Four hooks applied strategically, expose the metacarpal and need no attention once placed. This device is designed to be
re-sterilized for repeated use. See usage instructions.
|
Surgical Hand
Holding Table:
#SW-90-100
Your cost: $1,200
Note: Competitive
product cost is $4,500
Note: Includes tabletop, base plate, ball joint, stem, collar, 4 retractor posts, 4 hook retractors, 24" of silicone tubing.
Parts/ Accessories:
Tall Retractor Post,
#450HTO-T $27 ea.
Short Retractor Post,
#450HTO-S $23 ea.
Hook Retractors,
#450HRT $10 ea.
Screws, 6 screws are
included w/ ea. table,
#450HTS $1 ea.
Silicone Tubing, autoclavable
24" long, #450HTZ - Call
Aluminum Tabletop
#450HTT $600
Base Plate
#450HTP $195
Ball Joint
#450HTJ $208
Collar
#450HTC $174
Stem
#450HTD $155
|
Please note: All prices quoted are FOB Factory. Freight is pre-paid and added to invoice. No returns are allowed on the above
upper extremity devices due to potential contamination and infection control issues. Prices are subject to change without notice.
Terms & conditions
Average delivery time is 1 to 3 weeks depending upon availability.
Copyright 2005 - 2012, SW Med-Source Inc., All Rights Reserved.
Updated 3/12
|
